Rasmus Folsø
CEO - DESMI Ocean Guard A/S
Two new BWMS in DESMI
May 2021
– now a full range covering all needs for ballast water treatment at sea!
In order to meet market and customer demand, DESMI has developed two new Ballast Water Management Systems (BWMS) covering bulker solutions and ships sailing in IMO waters only or primarily: CompactClean Bulker and CompactClean OptIMO.
These new systems join the DESMI portfolio of BWMS alongside the well-known CompactClean BWMS.
“Not all ships are engaged in global trade but rather in regional or domestic trade, and as such a significant part of the world fleet will never, or only rarely, enter US waters. Such vessels can benefit of a BWMS solution that is optimized to IMO requirements and not US Coast Guard requirements, and this is exactly what we have developed with our new CompactClean OptIMO BWMS.
This BWMS has lower power consumption and fewer UV lamps and thus provides both CAPEX and OPEX savings, as well as an even smaller footprint than the market leading footprint of CompactClean BWMS”, says Rasmus Folsø, CEO DESMI Ocean Guard. He continues: “Moreover, the OptIMO BWMS meets the USCG requirements and can be operated in a US compliance mode, which however involves a smaller maximum flowrate, but does make it suitable for operation in US waters when needed”.
With the CompactClean OptIMO BWMS DESMI provide the customers with an opportunity to select a BWMS which is carefully optimized to the needs of the vessel and its operation. If max flowrate treatment is required globally, including US waters, then the market leading CompactClean BWMS, the only UV system available that does not employ special flow reduction when operated in US compliance mode, is the right choice.
On the other side, if there is no need to operate the BWMS at max flowrate in US compliance mode, either because US waters are never entered or because the vessel’s operation profile allows the discharge of ballast water at a reduced flowrate when in US waters, then OptIMO is the right choice as it provides both CAPEX and OPEX savings.
The CompactClean Bulker – is a BWMS optimized for the operation of Bulk Carriers or other vessel types, where discharge of ballast water is performed at increased flowrate. With the Bulker solution we can tailor-make a BWMS for our customers which will allow one flowrate during ballast, and another and higher flowrate during de-ballast.
As the filter is only applied during ballast operation it can be downsized to match the lower flow during ballast, and therefore CompactClean Bulker grants the customer a CAPEX reduction, as well as OPEX reduction in case the filter internals need replacement during the life of the BWMS.
